The high-precision electronic pressure sensor gauge additionally optimizes a temperature compensation circuit and a signal processing circuit, so this high pressure sensor gauge has an accuracy of 0.1% in the range of 0-70bar at general temperature rang. At present, this this high pressure sensor uses a ceramic core with a lower cost. If the customer has a higher-precision customization requirement, we can also replace the core with a higher-precision.
| Precision | room temperature maintains ±0.25%FS. 0~70 bar. ±0.25%FS is optional |
| storage temperature | -40~100℃ |
| Power supply voltage adaptability | The product is powered by a stabilized power supply, the positive and negative poles of the power supply are reversely connected, the maximum supply voltage is maintained for 1 minute, and the test after the product output is normal |
| overload | 1.5 times the maximum range |
| Vibration | Sweep frequency test, vertical + horizontal; |
| Vibration frequency: 10~60Hz; | |
| Low-frequency intensity 35, high-frequency intensity 60; | |
| Slope 1.0, acceleration 20; | |
| 10 cycles of 5 minutes each | |
| Group pulse interference | 1000V, 5KHz, the 30s |
| Static interference | 8000V electrostatic contact discharge |
| Insulation resistance | When the ambient temperature is 15°C~35°C and the relative humidity is 45%~75%, each set of terminals of the transmitter (including the housing) The insulation resistance between is not less than 100MΩ |
| Dielectric strength | The power port and the shell can withstand 500V AC/50Hz/1min without arcing or breakdown. |
Types of connections
How to Select
Code and description
| Notes | ||||||||||
T2010 | High Exactness Pressure Transducer | Model | |||||||||
Range | 0～1～20Bar/ 0～4...70bar/ 0-70Bar | Measurement Range | |||||||||
A4 | A4 = 4~20mA（Two-wired） | Output Mode | |||||||||
V05 | V05 = 0.5~4.5V（Three-wired） | ||||||||||
V0 | V0 = 0~5V（Three-wired） | ||||||||||
V10 | V10 = 0~10V（Three-wired） | ||||||||||
K | K = kpa | P | P = psi | Unit | |||||||
M | M = Mpa | B | B = bar | ||||||||
0.25 | 0.25 = 0.25％F.S | Accuracy class | |||||||||
0.1 | 0.1 = 0.1％F.S | ||||||||||
P | P = Packard（Parker plug） | Electrical connection | |||||||||
D | D = DIN43650C（Little Hirschmann） | ||||||||||
D1 | D1 = DIN43650A（Big Hirschmann） | ||||||||||
M | M = M12（M12 Waterproof outlet） | ||||||||||
C | C = Cable（Three core aviation connector） | ||||||||||
G | G = G1/4 | G2 | G2 = G1/2 | Pressure connection | |||||||
N | N = NPT1/4 | M20 | M = M20*1.5 | ||||||||
R | R = R1/4 | U | U = 7/16-20UNF External thread | ||||||||
B | B = BSP1/4 | Cable length | |||||||||
1.0 | 1.0 = 1m | ||||||||||
2.0 | 2.0 = 2m | ||||||||||
3.0 | 3.0 = 3m | ||||||||||
T2010 | 0-60 | V05 | B | 0.25 | M | G | 1.0 | Model selection example | |||
Scale: 0~70 bar
Accuracy: 0.25%FS
Temperature compensation and accuracy calibration
Robust 304/316 steel housing
Silicon Wafer imported from Germany
Pressure measuring of water, oil, fluid, and gas require relatively exact monitoring value and repeatable measurements.
Product Inquiry
English 
Español 
italiano 
