Selection Guide for Monocrystalline Silicon Pressure Transmitters

Monocrystalline silicon pressure transmitter selection and other pressure transmitter selection requirements, you need to take into account the measurement mode, working range, medium temperature, contact diaphragm material, working environment and lead pressure process connection form, the harshness of the environment and other specific factors, In Lefoo pressure transmitter manufacturer, so that the transmitter performance covers these factors, monocrystalline silicon pressure transmitter selection is considered complete.

1. Monocrystalline silicon pressure transmitter measurement mode

According to the nature of the measured pressure, select the gauge pressure, absolute pressure, differential pressure measurement mode.

① gauge pressure: pressure measurement with atmospheric pressure as the reference zero point, is the commonly used pressure measurement mode.

② Absolute pressure: the pressure measurement mode with zero pressure as the reference zero point of pressure measurement.

③ Differential pressure: the way to measure the pressure difference between the high and low pressure ends.

Monocrystalline silicon transmitter has products corresponding to the above various measurement methods. In the measurement of liquid level, for non-confined containers, the transmitter is installed at the top of the container when the input level transmitter is selected. When the transmitter is installed at the bottom of the vessel, choose a single flange level transmitter (complex conditions), remote pressure transmitter (complex conditions) or conventional pressure transmitter (simple conditions); for closed vessel level measurement, choose a double-flange level transmitter (complex conditions) or conventional differential pressure transmitter (simple conditions).

2. Monocrystalline silicon pressure transmitter working range

In consideration of the normal working pressure of monocrystalline silicon pressure transmitter range selection, in general, the working pressure should be in the transmitter full range of 60%-80%.

3. Monocrystalline silicon pressure transmitter medium temperature

The medium temperature refers to the temperature of the medium directly contacted by the measuring diaphragm. In the monocrystalline silicon pressure transmitter selection, should make the medium temperature does not exceed the limit temperature allowed by the measurement diaphragm. In the limit temperature of the environment, should be selected with temperature isolation remote transmission device remote pressure transmitter or remote differential pressure transmitter.

4. Monocrystalline silicon pressure transmitter contact diaphragm

Contact diaphragm refers to the measurement diaphragm in direct contact with the measured medium. To consider whether the measured medium will react chemically with the measuring diaphragm, whether it will damage the measuring diaphragm, whether it will react chemically with the sealing ring of the measuring diaphragm, dissolution corrosion and the physical state of the measured medium on the measuring diaphragm. Monocrystalline silicon pressure transmitter basic measurement diaphragm material is 316L, there are other materials for users to choose.

5. Monocrystalline silicon pressure transmitter working environment and the lead pressure process connection form

For the selection of the lead pressure process connection form, should be considered in the specific environment for easy installation, maintenance, replacement; should be as domestic as possible to choose industrial common connection form; to consider the physical state of the measured mechanism (such as whether viscous, clean or not, etc.). Comprehensive consideration of many factors to choose the transmitter and lead pressure process form (such as mounting bracket, capillary tube, extension flange level, etc.).

6. Monocrystalline silicon pressure transmitter environment harshness

Monocrystalline silicon pressure transmitter installed in the environment whether there is dust, combustible gases, moisture, steam, etc., taking into account a variety of factors to choose the transmitter with which to adapt to the explosion-proof level, etc.

The above factors are monocrystalline silicon pressure transmitter selection must be considered, any one of the negligence will lead to your pressure transmitter can not work long-term stable and reliable, you must pay attention to.