Types of Pump for Water Purifiers and Analysis of Malfunctions

Water purifiers, as important equipment to ensure the safety of drinking water in modern households, have complex and precise internal structures. Besides the core component, the filter cartridge, whi...
2025-03-16
Knowledge About Refrigerant Pressure Transducers

The Importance of Refrigerant Pressure MonitoringIn modern refrigeration systems, the stability and precise control of refrigerant pressure are key factors in ensuring efficient and safe system operat...
2025-03-01

Specification of Peristaltic Pump with Speed Control and Display LFPC302/ST

Main Functions

1. Settings: Pump tube model selection, pump operating speed adjustment, screen brightness adjustment.

2. Calibration: Perform flow calibration for different media.

3. Speed Control, Fixed Volume, Timed Fixed Volume, Timed Operation.

Technical parameter

LEFOO Peristaltic Pump with Speed Control and Display LFPC302/ST
Drive mode	Stepper motor
Operating Ambient Temperature	0℃~50℃
Rated Voltage	DC24V
Operating Flow Rate	0~500ml/min(The flow rate varies with different configurations; refer to the flow selection chart for details).
Flow Accuracy	±2%
Outlet Pressure	≤0.1MPa
Suction Lift	≤8m (The flow rate decreases as the suction lift increases.)
Head	≤8m (The flow rate decreases as the head increases)
Operating Current	≤0.5A at 24V voltage
Surface Temperature Rise	≤35K at 24V voltage.
Noise	Noise requirement: ≤65dB.

Flow standard(ml/min)

Driving Mode	Control Mode	Fitting Hose	Reference Flow Rate	Operating Voltage	Power Consumption	Outlet Pressure
42 Stepper Motor	Driver + Control Board	16#	≤180ml/min	DC24V	≤20W	≤0.15MPa
		25#	≤320ml/min
		17#	≤500ml/min

Button function:

"Forward and reverse" button: set the pump running direction, display forward or reverse at the top of the screen, indicating forward/counterclockwise operation.

"Mode" button: switch screen pages (setting, calibration, speed regulation, quantitative, timing quantitative, timing timing).

"Select" button: select the parameter you need to modify.

"Start and stop" button: control the pump to run and stop (stop/start is displayed in the upper right corner of the screen).

"Knob" button: rotate the knob to adjust the parameter value; press the knob to control the pump to run and stop.